Ceridust 9610 F wax 

 Products: Ceridust 9610 F is a polyethylene powder with PTFE modified wax, the average particle size of 8.5 microns. As mixed 
 Combined with strong polyethylene and smooth PTFE, Ceridust 9610 F can provide excellent wear resistance and smoothness. 
 Technical data: 
 Dropping point: about 125 ℃ 
 Acid value: 0 mg KOH / g 
 Density (200 C): about 0.99g/cm3 
 Particle size: d50 8.5 microns 
 d90 of about 15 microns Color: White 
 Performance: Ceridust 9610 F has the following characteristics: ※ In the traditional solvent-based systems (industrial paints, printing iron coatings, coil coatings to improve scratch resistance and )---- smoothness. ---- To prevent product from sticking to enhance slip resistance. ---- Against a hard object generated by the metal scratches. ※ :---- increase in the powder coatings in the scratch resistance and smoothness. ---- To prevent product from sticking to enhance slip resistance. ---- Paint in spray devices and increase the mobility of catheter. ---- In the final product against dirt contamination. Usage: Ceridust 9610 F can be used acrylic, alkyd, polyurethane, nitro cellulose, epoxy, polyester and acid curing resin system coating. In the mixed, you can use a high shear mixer, such as dissolution, or sanding machine. Dosage depends on the system and the formula used. In the traditional paints, the addition level of 0.8-2% of total formula, in order to more fully wet wax particles, stirring for at least 15 minutes. In the low viscosity of the system, wax may be settlement. However, the loose sediment is very easy to be dispersed. When the time for powder coating, Ceridust 9610 F First of all the ingredients together with other dry mix, then in the extruder or kneader evenly mixed, add the amount should not exceed 1%. Packaging and storage: Ceridust 9610 F is 20 kg paper bags, in dry and room temperature storage. 

 This information is to provide a general description and application instructions. They can not be regarded as the product performance and application specific adaptation of the guarantee. Ownership of the product should be respected and protected. Product quality assurance by the general sales conditions.