Surface modification additives LancoTM TF 18301Reference: 1/1/005-CNIssued: 07/04Fluid technologies for a better world ? product type classification of micronized PTFE modified polyethylene wax, sand the surface for powder coating product lines performance of the product is a stable PTFE and polyethylene composition can be formed wear uniform surface pattern. It has the following properties: ? use of a particular PTFE / polyethylene composition can form a uniform pattern on the surface ? Excellent scratch resistance and abrasion resistance ? Reduced coefficient of friction, increasing the surface smoothness of a typical application LancoTM TF 1830 is widely used in the following areas: ? powder coating resins can be used for the following coating materials: ? Mixture of polyester resins ? Polyurethane resins ? usage of the product should be in the extrusion process with the other components before the pre-dispersed (using drum mixer). With the requirements of the pattern effect, the formula should be added to flow control agent (such as benzoin or acrylic). Add the recommended amount of dosage of the product (based on total formulation by volume) was 0.8-3.0%. The Lubrizol Corporation Lubrizol Deutschland GmbH Lubrizol Southeast Asia (Pte) Ltd29400 Lakeland Boulevard Max-Planck-Stra?e 6 44 Tanjong PenjuruWickliffe, Ohio 44092-2298, USA 27721 Ritterhude, Germany Singapore 609032Telephone +1 (440) 943 4200 Telephone +49 421 69 33 -3 Telephone +65 6264 1644Fax +1 (440) 943 5337 Fax +49 421 69 33-400 Fax +65 6264 2105 Technical Data Appearance White powder chemical composition of the free flow of PTFE / polyethylene wax maximum grain size (μm) Dv50 9 (Malvern laser diffraction) Dv90 22 Melting point (° C) 102 Density (g / cm 3) 0.99 Hardness (mg KOH / g) 2 packaging and storage 20kg paper bag with the product packaging, paper bags should be kept in the dark shelves , storage temperature should not exceed 30 ° C. Since the date of delivery, storage for at least 12 months